BCHZV - TEFLITE RESIN-PART A.

  • MSDS: BCHZV
  • Manufacturer: GARON PRODUCTS INC
  • Product Name: TEFLITE RESIN-PART A.
  • National Stock Number: 8040-00N001928
Product Identification

Product ID:TEFLITE RESIN-PART A.
MSDS Date:01/01/1985
FSC:8040
NIIN:00N001928
MSDS Number: BCHZV

Responsible Party
GARON PRODUCTS, INC

Emergency Phone: 201-449-1776

Cage: EO138

Contractor
GARON PRODUCTS, INC.
WALL, NJ 07719 US

Telephone: 908-449-1776

Cage: EO138

Ingredients

N-BUTYL GLYCIDYL ETHER (BGE)

CAS: 2426-08-6

RTECS: TX4200000

Fraction By Weight: 12%

OSHA PEL 50 PPM

ACGIH TLV: 25 PPM; 9293

Hazards

Effects of Overexposure:SENSITIZATION OF OTHER ALLERGIC RESPONSES.

First Aid

First Aid:EYES: FLUSH WITH WATER FOR 15 MINUTES. SKIN: REMOVE
CONTAMINATED CLOTHING. WASH WITH SOAP & WATER.INHALATION: REMOVE TO
FRESH AIR. GIVE ART RESP OR OXYGEN. CALL MD. INGESTION: IF
CONSCIOUS GIVE H*2O O R MILK & INDUCE VOMITING. CALL MD. FOR ALL
CASES.

Fire Fighting

Flash Point:160F;71C, PMCC
Extinguishing Media:CO*2, FOAM, DRY CHEMICAL
Fire Fighting Procedures:USE SELF-CONT BRTH APPARATUS.
Unusual Fire/Explosion Hazard:NO UNUSUAL HAZARDS. HANDLE AS A
COMBUSTIBLE MATERIAL.

Accidental Release

Spill Release Procedures:REMOVE IGNITION SOURCES. ABSORB ON COMBUSTIBLE
MATERIAL. FLUSH CONTAMINATED AREAS WITH WATER.

Handling

Handling and Storage Precautions:HANDLE AS A COMBUSTIBLE MATERIAL. WASH
THOROUGHLY AFTER HANDLING. REMOVE CONTAMINATED CLOTHING AND WASH
BEFORE REUSE.
Other Precautions:MAY CAUSE SKIN SENSITIZATION OR OTHER ALLERGIC
RESPONSES. AVOID INHAL OF VAPORS. USE GOOD VENT IF HEATED OR
SPRAYED. PREVENT SKIN CONTACT.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPRVD ORGANIC VAPOR RESPIRATOR.
(MFR)
Ventilation:LOCAL EXHST & MECH VENT RECOMND TO KEEP BELOW TLV.
Protective Gloves:IMPERVIOUS
Eye Protection:SPLASH PROOF GOGGLES
Supplemental Safety and Health
PART A OF TWO PART KIT

Chemical Properties

Spec Gravity:1.13
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR TO LIGHT STRAW COLORED,LOW VISCOSITY LIQUID

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Hazardous Decomposition Products:CARBON MONOXIDE AND/OR CARBON DIOXIDE

Disposal

Waste Disposal Methods:MANUFACTURER RECOMMENDS INCINERATION. DISPOSAL
METHODS MUST BE IAW FEDERAL, STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.